Project

General

Profile

Actions

RPM's distribution based installation » History » Revision 30

« Previous | Revision 30/31 (diff) | Next »
Sam Kottler, 12/10/2012 04:51 PM


RPM's distribution based installation

We maintain a repository for RHEL and Fedora (and clones) - you may add it via:

Release

1.) For RHEL 6 ensure your system is subscribed to EPEL.

For RHEL 5 you will need to be subscribed to both EPEL and the RHEL Virtualization RHN Channel.
Also be advised, that on RHEL5 the Foreman Repo will update Ruby to version 1.8.7. This has
the potential to break stuff (like passenger, notes on getting it working again below),
so be sure you want to proceed before committing to the installation.

http://fedoraproject.org/wiki/EPEL

2.) Install the foreman-release.rpm for your version of RHEL or Fedora

http://yum.theforeman.org/releases/1.0/el5/foreman-release.rpm
http://yum.theforeman.org/releases/1.0/el6/foreman-release.rpm
http://yum.theforeman.org/releases/1.0/f16/foreman-release.rpm
http://yum.theforeman.org/releases/1.0/f17/foreman-release.rpm

3.) Install foreman and other foreman-* packages to add functionality:

foreman               Foreman server
foreman-proxy         Foreman Smart Proxy
foreman-cli           Foreman CLI utility
foreman-libvirt       libvirt provisioning support
foreman-ovirt         ovirt/RHEV provisioning support
foreman-ec2           EC2 provisioning support
foreman-vmware        VMware provisioning support
foreman-console       Console additions
foreman-mysql         MySQL database support
foreman-mysql2        MySQL database support
foreman-postgresql    PostgreSQL database support
foreman-sqlite        SQLite database support
foreman-test          Testing support (dependency rpm's not built yet)
foreman-devel         Development support (dependency rpm's not built yet)

5.) Configure

Edit /etc/foreman/settings.yaml and /etc/foreman/database.yml
su - foreman -s /bin/bash -c /usr/share/foreman/extras/dbmigrate

6.) Start the foreman service or set up passenger

service foreman start

7.) Set up Nginx + Passenger

Setting up Nginx + Passenger

On RHEL5 the RPM's at the URL above will not run after updating ruby. Fortunately it is fairly easy to get it working again.
After foreman is installed ensure /usr/sbin is in your path so that the axps binary can be found, otherwise the rpm's may
fail to build while complaining about being unable to find some files. Then do the following:

yum localinstall http://passenger.stealthymonkeys.com/rhel/5/x86_64/rubygem-daemon_controller-0.2.5-1.noarch.rpm
wget http://passenger.stealthymonkeys.com/SRPMS/rubygem-passenger-3.0.12-1.src.rpm 
yum-builddep rubygem-passenger-3.0.12-1.src.rpm 
rpmbuild --rebuild rubygem-passenger-3.0.12-1.src.rpm

Development

1.) For RHEL 5 & 6 ensure your system is subscribed to EPEL.

For RHEL 5 you will need to be subscribed to both EPEL and the RHEL Virtualization RHN Channel.
Also be advised, that on RHEL5 the Foreman Repo will update Ruby to version 1.8.7. This has
the potential to break stuff (like passenger, notes on getting it working again below),
so be sure you want to proceed before committing to the installation.

http://fedoraproject.org/wiki/EPEL

2.) Install the foreman-release.rpm for your version of RHEL or Fedora. This will only work when there is an RC that is in the repository for testing.

http://yum.theforeman.org/rc/el5/foreman-release.rpm
http://yum.theforeman.org/rc/el6/foreman-release.rpm
http://yum.theforeman.org/rc/f16/foreman-release.rpm
http://yum.theforeman.org/rc/f17/foreman-release.rpm

3.) Install foreman and other foreman-* packages to add functionality:

foreman               Foreman server
foreman-proxy         Foreman Smart Proxy
foreman-cli           Foreman CLI utility
foreman-libvirt       libvirt provisioning support
foreman-ovirt         ovirt/RHEV provisioning support
foreman-ec2           EC2 provisioning support
foreman-vmware        VMware provisioning support
foreman-console       Console additions
foreman-mysql         MySQL database support
foreman-mysql2        MySQL database support
foreman-postgresql    PostgreSQL database support
foreman-sqlite        SQLite database support
foreman-test          Testing support (dependency rpm's not built yet)
foreman-devel         Development support (dependency rpm's not built yet)

5.) Configure

Edit /etc/foreman/settings.yaml and /etc/foreman/database.yml
su - foreman -s /bin/bash -c /usr/share/foreman/extras/dbmigrate

6.) Start the foreman service or set up passenger

service foreman start

Or:

Passenger packages/repos are available at http://passenger.stealthymonkeys.com/

On RHEL5 the RPM's at the URL above will not run after updating ruby. Fortunately it is fairly easy to get it working again.
After foreman is installed ensure /usr/sbin is in your path so that the axps binary can be found, otherwise the rpm's may
fail to build while complaining about being unable to find some files. Then do the following:

yum localinstall http://passenger.stealthymonkeys.com/rhel/5/x86_64/rubygem-daemon_controller-0.2.5-1.noarch.rpm
wget http://passenger.stealthymonkeys.com/SRPMS/rubygem-passenger-3.0.12-1.src.rpm 
yum-builddep rubygem-passenger-3.0.12-1.src.rpm 
rpmbuild --rebuild rubygem-passenger-3.0.12-1.src.rpm

Nightly Builds

Create a /etc/yum.repos.d/foreman-nightly.repo with the following contents:
el5:

[foreman-nightly]
name=foreman-nightly
baseurl=http://yum.theforeman.org/nightly/el5/$basearch
gpgcheck=0
enabled=1

[foreman-nightly-source]
name=foreman-nightly
baseurl=http://yum.theforeman.org/nightly/el5/source
gpgcheck=0
enabled=0

el6:

[foreman-nightly]
name=foreman-nightly
baseurl=http://yum.theforeman.org/nightly/el6/$basearch
gpgcheck=0
enabled=1

[foreman-nightly-source]
name=foreman-nightly
baseurl=http://yum.theforeman.org/nightly/el6/source
gpgcheck=0
enabled=0

f16:

[foreman-nightly]
name=foreman-nightly
baseurl=http://yum.theforeman.org/nightly/f16/$basearch
gpgcheck=0
enabled=1

[foreman-nightly-source]
name=foreman-nightly
baseurl=http://yum.theforeman.org/nightly/f16/source
gpgcheck=0
enabled=0

f17:

[foreman-nightly]
name=foreman-nightly
baseurl=http://yum.theforeman.org/nightly/f17/$basearch
gpgcheck=0
enabled=1

[foreman-nightly-source]
name=foreman-nightly
baseurl=http://yum.theforeman.org/nightly/f17/source
gpgcheck=0
enabled=0

Getting the RPMS

If you just want to get the rpms:

http://yum.theforeman.org

Updated by Sam Kottler almost 12 years ago · 30 revisions