Project

General

Profile

BMC » History » Version 1

Version 1/7 - Next ยป - Current version
Sachar de Vries, 07/03/2013 04:52 AM


BMC

HP iLO 3 and higher support

To use foreman BMC support with ilo 3 and higher, the following iLO settings are required
  • an ilo user with administrator rights. Just giving the user "Virtual Power and Reset" rights does not seem to be enough
  • enable IPMI * Administration -> Access Settings -> Enable IPMI/DCMI over LAN on Port 623

after this you can verify access by running ipmitool:

ipmitool power status  -H <iLO ip-address> -U <user> -I lanplus
Password:
Chassis Power is on