BMC » History » Version 1
Sachar de Vries, 07/03/2013 04:52 AM
| 1 | 1 | Sachar de Vries | h1. BMC |
|---|---|---|---|
| 2 | |||
| 3 | h2. HP iLO 3 and higher support |
||
| 4 | |||
| 5 | To use foreman BMC support with ilo 3 and higher, the following iLO settings are required |
||
| 6 | * an ilo user with administrator rights. Just giving the user "Virtual Power and Reset" rights does not seem to be enough |
||
| 7 | * enable IPMI |
||
| 8 | * Administration -> Access Settings -> Enable IPMI/DCMI over LAN on Port 623 |
||
| 9 | |||
| 10 | after this you can verify access by running ipmitool: |
||
| 11 | <pre> |
||
| 12 | ipmitool power status -H <iLO ip-address> -U <user> -I lanplus |
||
| 13 | Password: |
||
| 14 | Chassis Power is on |
||
| 15 | </pre> |