Tftp » History » Version 6
« Previous -
Next » -
Mohit Chawla, 04/07/2011 01:48 AM
Edited puppet module's default tftp root path.
An essential first step in netbooting a system is preparing the TFTP server with the PXE configuration file and boot images. This document assumes that you have already configured your DHCP infrastructure, either via manual configuration or through the DHCP smart proxy.
Once enabled, there is currently only one valid setting to change, the default TFTP root. This is set with the
:tftproot: parameter, which defaults to
Please note that currently, foreman defaults to the name of the machine running the TFTP smart proxy. Future plans are to allow you to explicitly specify the nextServer value - see issue #800 for details.
Setting Up the Proxy Server Host¶
Regardless of the filesystem setup is performed, you must also make sure you have the wget utility installed and in the default path. wget is used to download OS specific installation when a given host is enabled for the build process.
Foreman includes a TFTP server module that will perform all of the basic setup. It defaults to TFTP root of
/var/lib/tftpboot, which may change if necessary. You will still need to provide the basic TFTP load images in your TFTP root directory. For vanilla PXE booting, this includes
The setup is very simple, and may be performed manually if desired.
- The TFTP root directory must exist (we will use
/var/lib/tftpbootin this example).
/var/lib/tftpbootwith PXE booting prerequisites. At a minimum, this should include:
- Create the directory
/var/lib/tftpboot/bootand make it writeable by the foreman proxy user (foreman-proxy, for instance, when installing through a rpm package).
- Create the directory
/var/lib/tftpboot/pxelinux.cfgand make it writeable by the foreman proxy user (foreman-proxy).
Setting Up Foreman¶
In most cases, the default templates should work fine. You do, however, need to make sure that a PXELinux or gPXE template is associated with your hosts. See Unattended Installations for details. The template will be used to define the PXE configuration file when a host is enabled for build.
This is a rough outline of the steps triggered on the TFTP smart proxy host when you click on the "Build" link for a host.
mkdir -p /var/lib/tftpboot/pxelinux.cfgif it does not already exist.
- Create a host-specific TFTP configuration file in
/var/lib/tftpboot/pxelinux.cfg/01-XX-XX-XX-XX-XX-XX, named based off of the MAC address, using the associated PXE template.
mkdir -p /var/lib/tftpboot/bootif it does not already exist.
- Download the OS specific kernel and initrd files using wget. The download URLs are derived from the installation media path, and OS specific log (see
debian.rbin foreman for examples of the gory details). The exact wget command is
wget --no-check-certificate -nv -c <src> -O "<destination>"
- At this point, the TFTP state is ready for the installation process.
- Once the host has completed installation, the OS specific installation script should inform foreman by retrieving the built URL.
- The host-specific TFTP configuration file is deleted.
- The kernel and initrd are not deleted, but left in place for future installs of the same OS and architecture combination. Please note that in the unlikely case that these files are modified, the simplistic freshness check of wget will likely get confused, corrupting the downloaded versions of the files. If this happens, you should simply delete the files and let them be re-downloaded from scratch.